Thông số kỹ thuật K-ARRAY KOMMANDER-KA84
General | |
Type | 4ch switching mode, Class D Amplifier |
Output Power | 4x 2000 W @ 4 Ω |
Impedance | minimum 4 Ω |
Frequency Response | 20 Hz – 20 kHz (±1 dB) |
Connections | 4x XLR (bal) Mic/Line input 4x XLR (bal) parallel line output XLR AES3 input & output KA-POT1 remote volume control inlet 2x NL4 speakOn loudspeaker output USB-B / RS485 for remote control |
Built-in DSP | Input gain, routing matrix, delay up to 330 ms, 3x input ch. + 6x output ch. full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), Onboard preset, Remote monitoring |
Remote control | K-Framework software via USB or RS485 |
Protections | Primary AC mains overcurrent/overvoltage, thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter. |
MAINS Operating Range | 100-240V AC, 50-60 Hz with PFC |
Power Consumption | 600 W @ 4 Ω load, Pink noise, 1/8 rated power |
Handling & Finishes | |
IP Rating | IP20 |
Dimensions (WxHxD) | 430 x 89 x 305 mm (17 x 3.5 x 12 in) |
Weight | 6.4 kg (14.1 lb) |
Material | Stainless Steel |
Accessories | |
Serial-to-USB converter | K-USB, K-DANTE, KA-POT1 |
Review K-ARRAY KOMMANDER-KA84
Chưa có đánh giá nào.