Thông số kỹ thuật K-ARRAY MASTIFF-KM112
ACOUSTICS | |
Power handling | 800 + 200 W |
Max Power | 1200 W |
Impedance | 8 + 8 Ohm |
Frequency range (-10 dB) | 70 Hz – 19 kHz |
SPL 1W/1mt | LF:98dB HF:105dB |
Maximum SPL | 127 dB (cont.) – 133 dB (peak) |
COVERAGE | |
Horizontal | 100°-30° (depending on horn orientation) |
Vertical | 30°-100° (depending on horn orientation) |
CROSSOVER | |
Type | DSP controlled + passive filter |
Frequency | 1300 Hz |
TRANSDUCERS | |
Low-mid frequency | 12” Neodymium magnet woofer with 3” voice coil |
High frequency | Neodymium magnet compression driver with 2” voice coil |
AUDIO INPUT | |
Analog connectors | 2 male + 2 female 3-pin balanced XLR |
Digital Connectors | 1 male + 1 female 3-pin XLR |
POWER AUDIO OUTPUT | |
Connector | Female Speakon |
Wiring | Ch1+ Pin1-=Ch1- Pin2+=N.C. Pin2-=N.C |
REMOTE CONTROL INPUT | |
Connectors | 1 male + 1 female XLR parallel / 1 USB B Jack serial converter |
POWER INPUT | |
Connectors | 2 x PowerCon IN/OUT |
AMPLIFIERS | |
Type | 1 module class D – DSP controlled |
Power | 1000W @ 8 Ohm |
Protection | Dynamic limiter, over current, over temp, short circuits |
AC POWER | |
Nominal power requirements | 100 – 240 Vac ±10% 50-60Hz |
Operating range | 85 – 265 Vac (auto-range) |
PHYSICAL OVERVIEW | |
Dimensions | 53.0 x 45.0 x 33.5 (20.86” x 17.71” x 13.18”) |
Weight | 23Kg (50.7 lbs) |
Review K-ARRAY MASTIFF-KM112
Chưa có đánh giá nào.