Thông số kỹ thuật K-ARRAY THUNDER-KMT21 I
ACOUSTICS | |
Power handling | 1600W (AES) |
Max Power | 2800 W |
Impedance | 4 Ohm |
Frequency range | 30 Hz – 150 Hz ± 3dB (preset relating) |
SPL 1W/1mt | 98 db |
Maximum SPL3 | 130dB (cont) – 136dB (peak) |
COVERAGE | |
Type | Omni |
CROSSOVER | |
Type | DSP controlled |
Frequency | 150 Hz (preset dependent) |
TRANSDUCERS | |
Full range | 1 x 21” Neodymium speakers with 3” voice coil |
POWER AUDIO INPUT | |
Analog Connectors | 2 male + 2 female 3-pin balanced XLR |
Digital Connectors | 1 male + 1 female 3-pin XLR |
AUDIO POWERED OUTPUT | |
Connector | Female Speakon |
Wiring | Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C |
REMOTE CONTROL INPUT | |
Connectors | 1 male + 1 female XLR parallel / 1 USB B Jack serial converter |
POWER INPUT | |
Connectors | 2 x PowerCon IN/OUT |
AMPLIFIERS | |
Type | 1 modules class D – DSP controlled |
Subwoofer power | 2400 Watt @ 4Ω |
Speaker power output | 2400 Watt @ 4Ω |
Protections | Dynamic limiter, over current, over temp, short circuits |
AC POWER | |
Nominal power requirements | 100 – 240 Vac ± 10% 50-60 Hz |
Operating range | 85 – 265 Vac (auto-range) |
CONSUMPTION | |
1/8 rated power (pink noise) @ 8Ω | 300 W |
PHYSICAL | |
Dimensions | 55.5 x 55.5 x 76.3 cm (21.85” x 21.85” x 30.03”) |
Weight | 49.0 Kg (108.2 lb) |
Review K-ARRAY THUNDER-KMT21 I
Chưa có đánh giá nào.